Windows and Doors Made Simple Phone: (612) 232-0142   Email: wadmadesimple@q.com

we make windows and door installation simple

Windows and Doors Made Simple excels in all types of exterior remodeling. From replacement windows to home siding, we've got you covered.  Are specialties include vinyl replacement, patio doors, entry doors, wood frame windows, egress windows, large specialty doors, executive home entry doors and service doors.

Licensed 191713BC, General Contracting, Certified window and door installers. Since 1994

Owned by Stout Construction

Scott A Van Zandt

We make the complicated process of replacing and installing windows, doors and Patio Doors simple. We are simply the best at window installations.

Click here for a Free Estimate.

Sub sill is rotted and must go!

Requires new sub sill work

WILL IT COST ME MORE IF MY OLD ENTRY DOOR IS IN BAD SHAPE ?

 If your old FRONT OR REAR ENTRY door is in really poor condition, it will sometimes cost a few extra repairs to get the existing opening ready for that brand new door. here it is ...

BASIC ENTRY DOOR FRONT DOOR OR REAR DOOR INSTALLATION COST $475.00

These are our typical most common Additional cost to fix things. . .

  • New sub sill rebuild kits from $65.00 TO $110.00

  • New interior trims from $90.00 TO $145.00

  • Siding Cut back Wood or metal siding, to allow nail fins or brick mold to fit application $110.00 TO $145.00

  • New Pine interior jamb kit / jamb extension trims kit. For all doors pine clear stock, for pre-hung doors only $140.00

Whatever it is, we will try to make it as cost effective as we can -

To see more additional charge scroll down
— Thank you , Scott Vanzandt

Other Additional Charges That can occur, due to your door opening existing condition:

Vinyl Siding retrofit , remove and reinstall vinyl siding around your door ,to allow new door installation $220.00

Wide trims & fillers kit, Oversized existing opening, 73" or greater , required to fit a 72” patio door or smaller entry door $225.00

New Pine interior jamb kit / jamb extension trims kit. For all doors pine clear stock, $155.00

New Oak interior jamb kit / jamb extension trims kit For all doors stained Oak stock, $195.00

New White interior jamb kit / jamb extension trims kit For all doors white paint stock, $175.00

Flooring fixes , rotten sill support under door threshold frami9ng and rim joist re-construction $110.00

Door bottom flooring transition, oak pine or white toe kicks $55.00

Flooring or structural water damaged Subfloor repair, support, plywood section FROM $60.00

Sill support PT & flashing replacement , where underside of door is rotted out. $85.00

Soffit removal or overhead modifications. to allow door to fit under obstruction or low eaves. $115.00

Header framing filler to drop down from tall door to lower door fix. $45.00

Deck boards taken up and placed back down, to allow bottom nail fin. $45.00

Large door and debris haulage fee. $185.00 pre arranged service

Mate new door to existing "Transom window" over head, patio door or entry door $145.00

Fuel service charge over 25 miles from our home base office. $25.00

Special access charge elevator, high deck, inaccessible back yard. 110.00

Permits for city inspection where required typically ADMIN FEE ONLY $75.00

haul away of old door is done with green waste management Bag only $45.00

Note bag cost is 45.00 plus haul service for your area.. approx. $115.00

NOTE:  Older homes with plaster , mason, or over sized windows , or lead remediation, charges may apply.


ENTRY FORNT OR REAR DOOR, Project Scope

The scope of a typical ENTRY door install listed here, are items that fall outside the basic scope of the package install

The existing door outside trim must be able to be removed without the siding being removed & disturbed:

Existing door should be the same size as package door or within tolerance for installation of 1"

Outside exterior of the home must be accessible within the scope of normal access, not second or third story.

Interior jamb trims should be reusable or work with the jamb & trims included with your package. If wide trims and fillers are need to retrofit existing opening, a wide trim kit may be required.

Flooring areas in front of the patio door should be in good repair, not heavy water damaged, or require structural, plywood, or framing re-work.

Soffits above the outside door should not encumber the top of door stock trims.

LANDING , Deck or patio area at bottom of door threshold should not encumber the door installation, or require deck boards or patio block to be moved to allow nail fins to be sealed.

Haul away of existing unit may not be included for certain packages without additional charge

Longer distances to project site may incur an additional fuel service charge , or if two man crew is required to complete the install a small fuel charge will be added.

*all add-ons are subject to change due to material cost fluctuations, and scope of labor.

 

At Windows and Doors Made Simple; Quality, Craftsmanship, and Integrity is our first concern. Each Installation is a reflection of our guarantee to you as a satisfied customer. We take great pride and care in our work and our goal never changes. We make the complicated process of replacing and installing windows and doors simple. We strive to simply be the best at window and door installations.

You can purchase windows/doors through us direct ... or we'll install your pre-purchased products for you. We'll even pick them up for you from your favorite home remodeling center.

Call today at 612-232-0142

Windows and Doors Made Simple is owned and operated by Scott Van Zandt.

Minnesota State Residential Builders License Number BC20191713